H22 Humidity Management Module

Product Information

H22 Humidity Management Module

Please Note: The price for this module includes a fixing kit, which is required to fit this module to the OvaEasy incubator.

Control of incubator humidity is the no.1 cause of confusion and misunderstanding in incubation procedure, frequently resulting in poor hatching rates.

The solution to the problem is Brinsea's new H22 Digital Humidity Management Module.

The module suits most fan-assisted incubators and provides continuous, direct and highly accurate relative humidity (% RH) readout. It also controls the amount of water evaporated within the incubator to maintain the humidity level set by the user.

The new H22 Humidity Management Module now features a digital display which clearly and continuously shows the Relative Humidity (RH) within the incubator, allowing you to both accurately monitor and if necessary adjust the humidity level in forced draught incubators as required, in order to help ensure maximum hatching success.

The Humidity Management Module will compensate for fluctuations in ambient humidity level, day or night, and allows the user complete control over incubation environment.

The unit stands beside the incubator, and is connected to it by a thin electrical lead and a flexible tube for water supply. The sensor mounts through a 25mm (one inch) diameter hole in the incubator wall, pre-cut on all Brinsea forced draft incubators. The H22 is suitable for many incubator brands holding up to about 1,000 eggs.

Continuous accurate control, water metering and direct display of current condition in % Relative Humidity.

Be the first to review this product!

Price: £299.00

• Tell a Friend
• Write review / comment